Name： PBT Non Reinforced
Product model： XD-0700HB
Species level： Non Reinforced
Main features： Good fluidity, good forming property, surface gloss is good
Technical Parameters
| Test Description | Test Standard | Test Conditions | Typical Value | Unit |
| Physical Property | ||||
| Density | ISO 1183 | - | 1.31 | g/cm³ |
| Moisture Absorption Rate | ISO 62 | 50%RH | 0.06 | % |
| Molding Shrinkage | ISO 294-4 | - | 0.8--1.2 | % |
| Mechanical Property | ||||
| Tensile Strength | ISO 527 | 5mm/min | 60 | MPa |
| Elongation at Break | ISO 527 | 5mm/min | 85 | % |
| Flexural Strength | ISO 178 | 2mm/min | 95 | MPa |
| Flexural Modulus | ISO 178 | 2mm/min | 2500 | MPa |
| Izod-Notched Impact Strength | ISO 180 | 23℃ | 4.5 | KJ/m² |
| Thermal Property | ||||
| Melting Point | ISO 3146 | - | 223 | ℃ |
| Heat Deflection Temperature | ISO 75 | 1.82MPa | 70 | ℃ |
| Melt Index | ISO 1133 | 230℃/2.16Kg | 55 | g/10min |
| Electrical Property | ||||
| Comparative Tracking Index（CTI） | IEC60112 | - | 600 | V |
| Volume Resistivity | IEC60093 | - | 1.00E+13 | Ω・m |
| Flame Retardant Property | ||||
| Flammability | UL94 | 1.6mm | HB | - |
| Glow Wire Test | IEC 60695 | 650℃ | <30 | s |
| Processing Conditions |
| Typical Value | Range | ||
| Melt Temperature | 235℃ | 205℃~270℃ | |
| Barrel Temperature | Rear | 215℃ | 200℃~220℃ |
| Middle | 245℃ | 225℃~265℃ | |
| Front | 265℃ | 245℃~275℃ | |
| Mold Temperature | 85℃ | 65℃~125℃ | |
| Maximum temperature of processing | 275℃ | ||
| Injection Speed | Medium To High Speed | ||
| Back Pressure | |||
| Pre Drying | 2-4hrs 105℃~135℃ |
Application
Automobile, household appliances, electronic appliances, sporting goods
Products
Equipments
Service Hotline
+86-769-82316888
Fax：
Email:
info@xsd08.com
